Communication Interface Settings#
Communication Interface Switching#
Serial Communication Mode# |
Factory Default: USB HID Communication Mode# |
USB CDC Communication Mode# |
USB Communication Version#
Factory Default: USB 1.1# |
USB 2.0# |
Serial Device Discovery#
Factory Default: Do Not Use Serial Device for Discovery# |
Use Serial Device for Discovery# |
Note
This function can be used when the device is connected to the host through the serial port for debugging, but image transfer is not supported.
USB Keyboard Output Settings#
Factory Default: Disable Ignore Caps Lock# |
Enable Ignore Caps Lock# |
Factory Default: Disable Character Inversion# |
Enable Character Inversion# |
Case Conversion (Lowercase)# |
Case Conversion (Uppercase)# |
Factory Default: Disable Case Conversion# |
Enable Case Conversion# |
Character Interval: 100# |
Character Interval: 50# |
Factory Default: Character Interval: 10# |
Character Interval: 0# |
Barcode Interval: 100# |
Barcode Interval: 50# |
Barcode Interval: 10# |
Factory Default: Barcode Interval: 0# |
Characters per Transmission: 20# |
Characters per Transmission: 10# |
Factory Default: Characters per Transmission: 1# |
Factory Default: Disable Ignore Chinese Input Method# |
Enable Ignore Chinese Input Method# |
Serial Port Settings#
Baud Rate Settings#
19200# |
38400# |
4800# |
Factory Default: 9600# |
115200# |
57600# |
Parity Settings#
Even# |
Odd# |
Factory Default: None# |
stop bit#
2# |
Factory Default: 1# |